Amorphous 2D Materials – A Novel Platform for Remote Epitaxy and Nanopatterned Epitaxy of III-V Semiconductors with Low Decomposition Temperatures

III-V semiconductor materials such as indium phosphide (InP) offer outstanding photonic properties that outperforms silicon, but the cost of these wafers is extremely expensive. Although reusing original wafers can effectively minimize the cost, current techniques for wafer recycling of these substrates add significant costs in fabrication, nullifying the cost savings by reusing the wafers. Besides, unlike other III-V materials such as gallium arsenide (GaAs), commonly used epitaxial lift-off method for wafer recycling is not well studied for materials like InP due to lack of lattice-matched sacrificial layers, which makes reusing these wafers more difficult. Remote epitaxy and nanopatterned epitaxy are newly discovered methods that enable single-crystal growth of III-V semiconductor thin films and easy exfoliation of these grown films, thus promising for a new cost-effective pathway of reusing wafers. However, previous methods of transferring two-dimensional (2D) materials, which use polymethyl methacrylate (PMMA) or metal stressor layers to transfer 2D materials grown on foreign substrates like copper (Cu) or silicon carbide (SiC), introduce defects and damages on the 2D layer and/or substrates during the transfer process. Remote epitaxial and nanopatterned epitaxial films grown on the damaged 2D layer/substrate suffer from lower crystal quality and imperfect exfoliation, which undermines wafer reusability and device performance.<br/><br/>Here we report the MBE growth of amorphous boron nitride (a-BN) on InP wafers at low temperature that enabled improved quality of remote epitaxial and nanopatterned epitaxial films and their perfect exfoliation. We show fully covered a-BN on InP substrates despite their low decomposition temperatures. The surface of a-BN coated InP substrate remains smooth with a RMS roughness of around 3Å. We also demonstrate 100% coverage of single-crystal InP thin films grown on a-BN, with the film's quality significantly improved compared to the case of transferred 2D materials. In addition, the growth and exfoliation were successfully repeated multiple times, proving the feasibility for InP wafer recycling. Through this low temperature MBE growth approach with remote epitaxy and nanopatterned epitaxy, we successfully demonstrate large-scale flexible thin film exfoliation and recycling of InP substrates, which will lead to new opportunities in InP thin film-based photonics and novel heterostructures with significantly reduced cost.